DIABLO SETUP RECOMMENDATIONS

• Weight distribution should be 42.5% front, 57.5% rear, and 50/50 side to side.

• Tire pressure should be 13psi front and 14psi rear, checked hot. 

• Make sure rear tires have same rollout, stretch the small tire if needed. 

• Toe should be zero or out 1/16".

• Factory camber setting.

• Front track width should be 45.5" to 46" wide overall.

• Use .032 pills to add more castor.

• Seat should be 10" up from the axle.

• Remove the third rail.

• Rear hubs should be medium.

• Rear ride height should be up.

• Rear track should be 54 " wide overall.

• Rear torsion bar should be in flat or out.

• Urethane seat struts should be tight, if used.

• Nerfs and bumpers should be snug.

• All settings are for standard HR axle. 

These are base settings to start with. Go to the track and make

adjustments, learn what they do, and take notes.